DIY! Telephone network protection, short message sending function....!
It is compitable with our accessories,such as sensor,detector,siren etc... User doesn't need to connect it with telephone line because it can be work as a mobile unit.
FUNCTION DESCRIPTION: Use Mobile Sim-card, dispense with telephone line
8 on-board zone inputs,
6DC V switching rechargeable batteries back up support
SMS support to receive or activate alarm situation and auto-dialer built-in to call out
DIY, remote, convenient, easy-to-install & operate
Wireless frequency format 900/1800 Mhz supported
wireless reviewed code to set up new code
More features to be ordered
The simple way to install: A, Please put the GSM main unit in proper place. B, Take one mobile SIMCARD to put into the main unit. Please open the cover carefully and insert the SIMCARD properly. C, After that, please tighten the screw. D, Accordingly insert the power and siren, once you hear one sound "B", it means this alarm system starts to initialization. E, Auto-check GSM network and log on. Initialization time is about one minute. The activated LED flashes as initialization.. F, System initialization completed, you can hear one long sound "B", the activated LED stops flashing and becomes normal, that means the whole alarm system is now activated. If network logging on is failed, the network LED flashes. If initialization is failed, you can hear constantly short sound "B", that means SIMCARD is out of network or boot-strap uncompleted. The system is not available to dial out telephone number, just fitting independently locale alarm. G, The boot-strap processing of the System is successfully completed.
|
|
|
|
|
